RAM® Flex-Base™ Adhesive Mount with Diamond Adapter
Flexible Base with Pressure Sensitive Adhesive Pad, Plastic

The High Strength Composite Semi-Permanent Adhesive Mount Base consists of a 2.5" diameter flexible base with a standard RAM double hole diamond plate end. The base includes a RAM-202PSAU Semi-Permanent Adhesive Disk. The diamond plate end has two holes 1.912" from center to center. This will connect to the RAM-B-238U or RAP-B-238U Diamond Plates Series, to the universal industry standard AMPS hole pattern or directly to the back of the RAM HOL Cradles. This adhesive base DOES NOT have a RAM 1" rubber connection ball.  This could be used to mount any RAM arm that uses diamond bases to any flat or slightly curved surface.  For example it could be used to mount a RAM arm to the cockpit sidewall or instrument panel in a sailplane.  For best results: apply to a clean, dry surface. 

SPECS:

Hardware Included: 
(1) 2.5" Double Adhesive Pad
(1) Alcohol Prep Pad
(2) #8-32 x 3/4" Machine Screws
(2) #8-32 Nylock Nuts
(2) #6-32 x 3/4" Machine Screws
(2) #6-32 Nylock Nuts

Hole Pattern:
2-Hole AMPS: 1.912"

Materials: 
High strength composite

Diameter:
2.5 inches 

Weight:
0.12 lb - 1.2 oz (34 g)

Thickness (stand-off) including adhesive disk: 0.75 inches

Warning: The adhesive is very strong - making it somewhat difficult to remove.