MH3 or MH4 Flowmeter with BNC Connector and Tubing
Flowmeters for Built-in systems with tubing and connectors.

Designed for OEM Built-In systems, the MH-3 Flowmeter (green) is calibrated for use with the Oxymizer™ cannula for flight up to 18,000 ft. The MH-4 (red) has two altitude flow scales. The left (compressed) scale is calibrated for the Oxymizer™ cannula and is limited to flight of 18,000 ft.and below. The right scale is calibrated for a standard cannula or facemask up to 30,000 ft.

These Flowmeters come with 1 meter of Poly Tubing (Tygon® type) and Brass plated metal fittings. They are used where higher system outlet pressures are encountered, such as aircraft with built in systems.

Flow Meter Options (select when ordering)

• MH3
  
• MH4 
  

BNC Connector Options

• PB 750 - fits late model Cessna aircraft with built-in oxygen systems.
• PB 566 - fits most Cessna made 1979 to 1982 (depending on model) with built-in oxygen systems.
• Scott 100 - fits most Beechcraft, Mooney and Piper aircraft with built-in oxygen systems.
• CPC - fits most Cirrus, Columbia, Coralis and many other new models

Options

• MH-00BNC-1060-00, MH3 Flowmeter with PB750 BNC Connector($129) Documentation
• MH-00BNC-1062-00, MH4 Flowmeter with PB750 BNC Connector($129) Documentation
• MH-00BNC-1064-00, MH3 Flowmeter with PB566 BNC Connector($129) Documentation
• MH-00BNC-1066-00, MH4 Flowmeter with PB566 BNC Connector($129) Documentation
• MH-00BNC-1068-00, MH3 Flowmeter and Scott 100 BNC Connector($115) Documentation
• MH-00BNC-1070-00, MH4 Flowmeter and Scott 100 BNC Connector($115) Documentation
• MH-00XCP-1036-01-1 MH3 Flowmeter and CPC BNC Connector($99) Documentation
• MH-00XCP-1037-01-1, MH4 Flowmeter and CPC BNC Connector($99) Documentation

Included: MH3 or MH4 flowmeter, BNC connector, tubing
Not Included: cannula, face mask, regulator, oxygen cylinder

Documentation:
BNC-SCOTT Fitting A-8750(md)
BNC-750(md)
BNC-566(md)
General Specifications for MH-3 and MH-4