RAM Round Plastic Base with 1" Ball and Adhesive
The RAP-B-378U consists of a 2.5" composite base that connects to a 1" ball, double-sided adhesive PSA stick pad and sealed alcohol prep pad. This base will attach to all RAM double socket arms that will accommodate 1" ball bases. The base is somewhat flexible so it can conform to slightly curved surfaces.
Note: I use this in my car as part of my iPhone mount - together with a RAP-B-201U and RAM-HOL-UN7BU.
Note: A single RAM-202PSAU adhesive discs is included. You may want to order a few extras for future use.
Tip: To assure solid and reliable adhesion:
- Clean the mounting surface and the base of the RAP-B-378U with the provided alcohol wipe immediately before application
- Remove the plastic from one side of the adhesive disc and apply it to the RAP-B-378U base.
- Remove the plastic from the other side of the adhesive disc and press the base firmly onto the mounting surface for about 1 minute.
- Wait 24 hours before mounting the arm and Oudie on the base. This allows the adhesive to setup.
Videos:
Overview: https://youtu.be/tmyvw8e0DV0
Installation Tips: https://youtu.be/kXxBlKp7LXA
Weight: 1 ounce
INSTRUCTIONS
Related Products
RAM-HOL-UN7BU
RAM Universal X-Grip™ Cell Phone Holder with 1" BallSometimes, its all about the design. If you are ..
$31.00
RAM-HOL-UN10BU
RAM Universal X-Grip™ IV Tablet Holder with 1" Ball for Smart Phones and Small TabletsDescription:Th..
$36.00
RAM-202PSAU
Rubber Mounting Pad with VHB Adhesive, 2 7/16" DiameterThis is a thin rubber pad with strong adhesiv..
$7.00
Naviter-Oudie2-Cradle-Richter
Oudie Cradle - RichterThis cradle is provided in the box with Oudie 2 and Oudie IGC units. It is des..
$5.00
Naviter-Oudie-Mount-RAM-Adhesive
Oudie RAM Mount with Round Adhesive BaseThis is a great way to mount your Oudie, Oudie 2 or Oudie IG..
$52.00
LXNAV-Nano4-Cradle
Nano4 CradleGreat mounting cradle for Nano4 - simple, light-weight, elegant. The Nano4 snaps in easi..
$45.00
LXNAV-Nano4-Mount-AdhesiveBase
Nano4 RAM Mount with Adhesive BaseGreat mounting cradle for Nano4 - simple, light-weight, elegant. T..
$69.00
RAP-B-378-UN7U
RAM® X-Grip® Phone Mount with Flex Adhesive BaseThis is my favorite car phone mount. I have th..
$57.00
RAM-HOL-UN12WB
RAM® Tough-Charge™ with X-Grip® Tech Waterproof Wireless Charging HolderFEATURESWaterproof Qi compat..
$132.00
RAM-HOL-UN14WB
RAM® Tough-Charge™ with X-Grip® Tech Waterproof Wireless Charging HolderFEATURESWaterproof Qi compat..
$118.00
RAP-B-378-UN14WB
Adhesive Mount base "B" Size and Plastic 3" ArmThis mount is recommended for use with all RAM-H..
$158.00
RAP-B-378-UN12WB
Adhesive Mount base "B" Size and Plastic 3" ArmThis mount is recommended for use with all RAM-H..
$172.00
Naviter-Oudie-N
Naviter Oudie NTrade-Up DealsTrade-In Oudie 1 for Oudie N, $790, credit for trade-in: $100 (minus re..
$890.00
Naviter-Cradle-Universal
Naviter Cradle UniversalDescriptionThe Naviter Cradle Universal securely holds any Oudie, and most S..
$25.00
RAM-HOL-TAB12U
RAM® Tab-Tite™ Universal Spring Loaded Holder for 8" Tablets with CaseOverviewThe RAM®&nbs..
$30.00
RAM-HOL-TAB29U
RAM Mount RAM Tab-Tite Cradle for 7-8 inch Tablets in Heavy Duty CaseOverviewThe RAM® Tab-Tite™..
$29.99
TRIPLTEK-8-Back-Plate
Back aluminum backplate for TRIPLTEK 8 Pro. Comes with mounting screws, with 1/4" female camera thre..
$29.00
Naviter-Oudie-N-Cradle
Naviter Oudie N CradleFor mounting an Oudie N using an existing Oudie mounting arm, or for mounting ..
$60.00