XCR-4P, Four Place CGA-540 Regulator
FPR-REG-CGA540-no gauge
CGA-540 port for oxygen cylinder and 4 female CPC ports
Includes 1 extra O-ring and 5 feet (1.52 m) of red 4 mm O.D. tubing
The XCP-FPR regulators (CGA-540 or DIN-477) are available with a high pressure cylinder monitoring gauge.
Our oxygen regulators are constant-pressure calibrated to deliver about 15 psig. (1 bar) of pressure dynamically (that is while flowing). They have been designed to stop the high-pressure inlet side while the low pressure outlet side is stopped (static no-flow condition) at a pressure of about 20 psig. This allows for a semi-remote on/off control action of the regulator. This is utilized in the EDS, XCR on/off control system and in the XCP systems while no stations are connected to any of the outlets.
Rated for inlet pressures up to 3,000 psi (207 Bar).
Note: The gauge in the image at right is on the valve, not the regulator.
Male CPC Connector |
Note: The gauge in the image above is on the valve, not the regulator.
Mounting and Removing a Mountain High Regulator
Inserts and Related Documents:
General Specifications
MH "3G" Regulator Family Single-Stage, NO-Gauge Regulators