TR-105c CGA-540 to CGA-540 Oxygen Transfiller Device with O-Ring Fittings, 2 Gauges and Bleed Valve - Best

The TR-105c oxygen cylinder transfiller is a dual gauge version of our TR-95c. The TR-105c has an additional gauge at the slave cylinder or aircraft side so that you can pre-check and monitor cylinders being filled. The gauge is great for monitoring the transfilling process.
Standard length is 48 inches (121.92 cm). Custom lengths available on request.

Length Options

• -04, 4 feet (1.22 m), $589
• -06, 6 feet (1.83 m), $599
• -08  8 feet (2.44 m), $625
• -10  10 feet 3.05 m), $645
• -12, 12 feet (3.67 m), $679

The TR-95c, available in CGA-540 or DIN-477,  provides economical oxygen transfilling for soaring and flying clubs where frequent servicing of cylinders occurs. Both connecting ends have O-ring seals for a positive air-tight fit. The pressure/contents gauge shows how much oxygen remains in the master supply cylinder.

The TR-95c  master transfer (regulating) valve  controls the flow of oxygen into the cylinder or aircraft being filled. A separate bleed valve allows bleeding only the fittings (rather than the entire service line) with almost no loss of valuable oxygen. The DIN-477 version of our TR-95c transfiller has the same features  except that it is compatible with DIN-477-9 Swiss/Euro systems. A dual gauge version of this transfiller is also available (TR-105c).

Standard length is 48 inches (121.92 cm). Custom lengths are available on request.

Similar to photo above

Inserts and Related Documents:
Mountain High Transfillers Document