EDS O2D1-2G 1-Place Delivery System with XCR-1P-Axial regulator, 00REG-1033-01, CGA-540 type - Most Popular

If you already own a cylinder, the O2D1-2G with our one-place XCR CGA-540 regulator (4mm) can get you flying longer and higher. The kit includes the O2D1-2G unit, Regulator, 2 EDS cannulas (one flare tip, 1 regular), 1 face mask, 2 AA batteries, tote bag and User Manual.

The EDS-O2D1-2G should be used with any of our XCR, XCP, or 4-place FPR regulator. for correct pressure and oxygen delivery. The low-pressure service line is a high quality polyurethane line that is kink-resistant and flexible under varying temperatures. The cannula, face mask and service line connect to the EDS unit via color-coded “Quick-Connects” providing an air-tight fitting by hand. These fittings can be connected and disconnected many times. With the optional XCP connecting kit, the EDS can be used with an XCP system at the same time flow meters are being used. In addition, the optional ALPS Facemask with or without microphone, is the perfect addition to any EDS system.

Note: The regulator does not have a gauge on it. A gauge is not included with this system. The photo at right shows a gauge, but it is on the cylinder valve, not on the regulator.

Included:

Items included in EDS O2D1 Delivery System Kits

EDS O2D1-2G Unit	EDS Cannulas (standard tip) 00EDS-1084-00	EDS Cannulas (flare tip) 00EDS-1084-01	EDS Face Masks 00EDS-1078-00


EDS to XCP Coupler Kit	Tote Bag, 12" x 12" 60000-0012-00	2 AA Batteries	XCR-1P-Axial Regulator

Not Included:

Oxygen - The oxygen tank is empty.

See our Full-Pack and Tuff-Pack cylinder harness & carry-caddies for these cylinders. Also see CMK cylinder hold-down kits. With the optional EDS to XCP Coupler Kit, the EDS can be used with an XCP system at the same time flow meters are being used. Also, the optional ALPS FaceMask with or without microphone is the perfect addition to any EDS system.