1 Place System with EDS O2D1-2G Kit, XCR-1P-Axial Regulator, CFFC-022 (22 cu. ft.) Carbon Fiber Wrapped Cylinder and Full-Pack

The system consists of the following items: Oxygen cylinder with Full-Pack or CMK mounting kit, the XCR primary reducing regulator, low-pressure service line, EDS Pulse Demand™ unit, breathing cannulas, face mask and tote bag.

The basic EDS-O2D1-2G is a single place outlet system. Two units may be combined for a two place system such as would be used in a tandem configuration.

Duration Table (hours)

Cylinder

Fill Pressure

Volume

Diameter
Max.

Length
Max.

Weight
Empty

Duration in Hours
(1 Place)

bar

PSI

liters

cu. ft.

inch

10K ft

15K ft

18K ft

CFFC-022

128

1850

623

13.2

5.2

54.1

21.3

1.9

4.2

38.1

18.5

14.4

CFFC-022 Carbon Fiber Cylinder
Full-Pack padded carrying pack
XCR-1 regulator (CGA-540 type), 00REG-1033-01

Items included in this EDS O2D1 Breathing System Kits

CFFC-022 Carbon Fiber Oxygen Cylinder	EDS O2D1-2G Unit	EDS Cannulas (standard tip) 00EDS-1084-00	EDS Cannulas (flare tip) 00EDS-1084-01	EDS Face Masks 00EDS-1078-00


Tote Bag, 12" x 12" 60000-0012-00	00REG-1033-01 Regulator and red tubing	Full-Pack	EDS to XCP Coupler Kit	Example system with KF-011 Cylinder (Included Tuff-Pack or Full-Pack not shown)

Not Included:

Oxygen - The oxygen tank is empty.

See our Full-Pack and Tuff-Pack cylinder harness & carry-caddies for these cylinders. Also see CMK cylinder hold-down kits. With the optional EDS to XCP Coupler Kit, the EDS can be used with an XCP system at the same time flow meters are being used. Also, the optional ALPS FaceMask with or without microphone is the perfect addition to any EDS system.

Product Manual:
EDS 02D1-2G and EDS 02D2-2G User Manual Rev. -1