Alps Face Mask
The newest members of the Mountain High family of products are the MH ALPS FaceMask and the MH ALPS-M (for microphone) FaceMask. The ALPS-M is outfitted with an electronic "Clear-Speak" ambient noise-canceling microphone that enables pilots to fly with safety and comfort with clear, crisp voice communication and is compatible with most aircraft systems. The mask is easy to put on and exceptionally comfortable as it does not require a polyvinyl bag. The ALPS or the ALPS-M FaceMask can be used with any of the MH oxygen systems.

FAA-CAMI successfully tested the MH ALPS FaceMask (with or without microphone) with the EDS-ip system.  It is one of the most popular members of the Mountain High family of products. The mask’s electronic “David Clark” ambient noise-canceling Amplified Electret M-7A microphone enables pilots to fly with safety and comfort with clear, crisp voice communication.  This M-7A is the most advanced noise cancelling microphone available.

The mic cable attaches to a U-173 delta type military style connector and terminates in the standard PJ-068 Jack.
For use with the LEMO connector the PA-100B BOSE microphone-only switch-over adapter is required.
Exchange one Alps Microphone to another ALPS mask, or easily add it to a non-microphone mask.

The mask is easy to put on and exceptionally comfortable as it does not require a polyvinyl bag.    Feed tubes allow connection to any of the Mountain High Oxygen Systems.  Feed tube connectors plug into EDS-ip built-in oxygen systems, EDS or Constant Flow portable oxygen systems.  The constant flow mask is also compatible with most other constant flow systems that incorporate a flow meter.

Choose the mask size that’s right for you.  All styles are available in small, medium or large.  Therefore, view the Documentation tab for help in choosing the size that will best fit your face. The ALPS mask is also available with J-type brackets for helmets. (Call)

NOTE: For early style built-in (ip) systems choose the twist lock feed-tube. For later built-in (ip) systems choose the EDS style feed-tube.

Part 23.1447 (c) states:
(c) If certification for operation above 18,000 feet (MSL) is requested, each oxygen dispensing unit must cover the nose and mouth of the user.

For the full Part 23.1447 see PDF documentation.

Sizing Chart
 

(1) Measure from the bridge of your nose to the bottom of your chin.
(2) Compare your measurement to the table below to choose best fit.

Inserts and Related Documents:

MH Oxygen ALPS Facemask Kit Information Package
§ 23.1447 Equipment standards for oxygen dispensing units