Cable, EW MicroRecorder RJ45 connector to DB-9f (9-pin female) connector for PDA cable or PDA Cradle Cable, This cable is designed to allow an EW microRecorder to be connected to 12V power and to a PDA power/data cable. The microRecorder provides 5V power for the PDA.  GPS data is sent from the microRecorder to the PDA.  The PDA transmit line is connected to the microRecorder's receive line so the PDA can send task declarations and other settings changes to the microRecorder.  This cable does not connect directly to any PDA - A PDA power/data cable (such as the I38C-x cable for most iPAQs), or an iPAQ cradle with built-in power/data cable (such as a Nimbus cradle) is required.  2 cables exit the DB-9f connector - the 12V power leads (2 m long) and the flat phone style cable to the microRecorder's RJ connector.  The "x" in the model number represents the length of the flat cable between the microRecorder and the DB-9f connector. 

Options
Length of cable from microRecorder to DB-9f connector

• 0.3 m (11.8 in) - In Stock - Most Popular
• 0.5 m (19.7 inches) - 2 week lead-time
• 1 m (3.28 feet) - 2 week lead-time
• 2 m (6.56 feet) - 2 week lead-time
• 3 m (9.84 feet) - 2 week lead-time

DB-9f Connector Type

• Standard - Includes nuts so the PDA cable's connector can be connected to it securely.
• Panel Mount - Includes tabs with mounting screws so it can be mounted to the back of the instrument panel.  The diagram below shows the required holes in the panel.