Bioenno Charger for LiFePO4 Batteries, 2A, with Alligator Clips
It is very important that these batteries are charged with the battery chargers found here. They are able to charge the batteries quickly and safely. Since the batteries feature built-in battery protection circuitry, the chargers are relatively simple and inexpensive when compared to the chargers required for lead-acid batteries. This version of the charger is supplied with small alligator clips.

• Input: 100 to 240 VAC, 50/60Hz, 0.5A
• Output: 15V, 2A
• Status LED: Red when charging at greater than 0.2 A, Green when the current output drops to less than 0.2A.

See also the version below with both alligator clips and Anderson Powerpole connectors.

Recommended for us with Bioenno-BLF-1209 batteries.

Warranty
Warranty for Battery Accessories

IMPORTANT NOTE
It is important that the charger's alligator clips do not touch (short) when the charger is plugged-in.  That would probably damage the charger.  Connect the alligator clips to the battery before connecting the charger to power.  Alternatively the optional Anderson Powerpole connectors would eliminate the possibility of shorting and damaging the charger.