Cable, 0.3 m (11.8 inches), Cable for LX EOS and Naviter Oudie Power/Data Cable - No Power
Used to connect the "USER" port on an LX EOS to an Oudie power/data cable. The Oudie power/data cable is supplied with the Oudie. The Oudie power/data cable converts the RS232 data from the LX EOS to TTL level serial data for the Oudie. This cable does not pass 12V power from the LX EOS to the Oudie power/data cable - so the Oudie power/data cable must be powered with 12V using its red and black power leads. A 6-pin RJ12 connector is used at the LX EOS end of the cable. An RJ45 8-pin connector is used at the Oudie power/data cable end. An  RJ-Coupler-RJ45-RJ45 is required for connecting this cable to the Oudie power/data cable's male RJ45 connector. An RJ-Coupler-RJ45-RJ45 is included in the box with the Oudie.