Battery Harness with Inline Fuse and Anderson Powerpole Connectors - with 0.250" Female Spade "FASTON" connectors
This is a clean and simple wiring harness for connecting glider electronics to a glider battery. It includes 0.250" female spade "FASTON" connectors for connection to the battery's male spade connectors. Anderson Powerpole connectors are used to make it easy to disconnect the battery for charging at the end of the day. One Anderson Powerpole connector is used on the wiring harness, and another one is provided for connection to the glider electronics. An inline automotive style fuse holder is used between the Anderson Powerpole connector and the battery connectors. A 5A fuse is included. Double-sided tape is provided on the fuse holder so it can be secured to the battery. The Anderson Powerpole connector are designed such that it is impossible to connect them backwards.
Important Note: Always use a fuse at the battery. If you don't use a fuse at the battery, a short in the system could cause a fire. An in-flight fire in the cockpit is obviously very dangerous.
You may want to purchase an additional Anderson Powerpole connector for use on the battery charger cable.
Assembly Instructions for Anderson Powerpole connectors
I recommend printing out both of the instructions documents below.
PowerpoleAssemblyInstructions-Overview.pdf
PowerpoleAssemblyInstructions-Detailed.pdf