Cable, NanoPower to FLARM or PowerFLARM RJ45 Port
This cable connects the NanoPower adapter's RJ45 port to the RJ45 8-pin port on a FLARM or PowerFLARM. This allows a Nano3 to receive and display FLARM, ADS-B and PCAS (Mode C/S transponder) traffic. The NanoPower adapter must be powered with 12V for data transfer to work. This cable does not provide 12V power to the FLARM.

Note: This cable has RJ45 connectors on both ends, but they are wired differently. It is important that the cable is connected in the correct direction. It is clearly marked "<<<< FLARM -----Cumulus-NP-PFlarm------ NanoPower >>>>", but it is up to the installer to connect it correctly.

Lenth: 0.3 m (11.8 inches)