This presentation was created for 302 training at the SSA Convention in 2007.  It gives an overview of all the 300 series products as well as tips for each product.

• Download flight logs
• Check the validity of downloaded flight logs
• Upload waypoints to the GPS/logger
• Upload task declarations to the GPS/logger
• Edit Pilot Name, Glider type and ID and other data
• Setup units
• Edit polar data
• Edit instrument settings such as:
  • Speed-to-fly deadband
  • Logging interval
  • Arrival radius
  • Approach radius
  • Goal height
  • Select Variometer type (Total Energy, Super-Netto (default) or Netto
  • Enable or disable the sink tone

Note: This is version 2.57 but the home screen in the software incorrectly shows that it is version 2.5.6.1.

Installation Tips
Save the file to your PC and transfer it to the Pocket PC using Microsoft ActiveSync or a memory card.  I recommend installing the program into the Windows/Start Menu directory on the Pocket PC and saving a backup on a memory card.

• Download flight logs
• Check the validity of downloaded flight logs
• Upload waypoints to the GPS/logger
• Upload task declarations to the GPS/logger
• Edit Pilot Name, Glider type and ID and other data
• Setup units
• Edit polar data
• Edit instrument settings such as:
  • Speed-to-fly deadband
  • Logging interval
  • Arrival radius
  • Approach radius
  • Goal height
  • Select Variometer type (Total Energy, Super-Netto (default) or Netto
  • Enable or disable the sink tone

Note: This is version 2.57 but the home screen in the software incorrectly shows that it is version 2.5.6.1.

Installation Tips
Save the file to your PC and transfer it to the Pocket PC using Microsoft ActiveSync or a memory card.  I recommend installing the program into the Windows/Start Menu directory on the Pocket PC and saving a backup on a memory card.

• Download flight logs
• Check the validity of downloaded flight logs
• Upload waypoints to the GPS/logger
• Upload task declarations to the GPS/logger
• Edit Pilot Name, Glider type and ID and other data
• Setup units
• Edit polar data
• Edit instrument settings such as:
  • Speed-to-fly deadband
  • Logging interval
  • Arrival radius
  • Approach radius
  • Goal height
  • Select Variometer type (Total Energy, Super-Netto (default) or Netto
  • Enable or disable the sink tone

Installation Tips
Save the file to your PC and run it on your PC.

Used to transfer a new firmware (software) file to a 302.  The latest firmware file is available below.

Installation Tips
Save the file to your PC and transfer it to the Pocket PC using Microsoft ActiveSync or a memory card.  I recommend installing the program into the Windows/Start Menu directory on the Pocket PC and saving a backup on a memory card.

Important Note
Do not interrupt the firmware upgrade process.  If it is interrupted the 302 will need to be returned to the factory for service.  Don't disconnect the cable or turn-off the computer or 302 during the upgrade process.

Used to transfer a new firmware (software) file to a 302.  The latest firmware file is available below.

Installation Tips
Save the file to your PC and transfer it to the Pocket PC using Microsoft ActiveSync or a memory card.  I recommend installing the program into the Windows/Start Menu directory on the Pocket PC and saving a backup on a memory card.

Used to transfer a new firmware (software) file to a 302.  The latest firmware file is available below.

Installation Tips
Save the file to your PC and run it on your PC.

Important Note
Do not interrupt the firmware upgrade process.  If it is interrupted the 302 will need to be returned to the factory for service.  Don't disconnect the cable or turn-off the computer or 302 during the upgrade process.

The following upgrade fixes the following bugs:

• Fixes the 'Most Recent Points' lockup. This happens when there are no turnpoints in the 302 and you attempt to go up or down to 'view' the turnpoints that are in the 302. The 302 attempts to spend eternity looking for a
   turnpoint then the watch dog timer resets the unit.
• Fixes the recently discovered Winpilot and Glide Navigator problem of the 302 resetting the MacCready and Bug Settings back to 0 after the PDA set it to a non-zero value.

Installation Tips
Save the file to your PC in the same directory with the 300 Reloader program.  Use the 300 Reloader program to upload it to the 302 or 302A.

Important Note
Do not interrupt the firmware upgrade process.  If it is interrupted the 302 will need to be returned to the factory for service.  Don't disconnect the cable or turn-off the computer or 302 during the upgrade process.

Also, this firmware is only for 302 variometers, not for the 302A GPS flight recorder.

Directions for using the files on your PC

• Download and open the zip file: demo303.zip
• Extract the files to a directory somewhere on your PC - 
  I recommend the "My Documents/303 Demo" folder
• Open the folder and double-click on the file "_303demo.htm"
• Follow the directions on the screen

Directions for using the files on your PC

• Download and open the zip file: demogpsn.zip
• Extract the files to a directory somewhere on your PC - I recommend the
   "My Documents/GPS-NAV Demo" folder
• Open the folder and double-click on the file "demogpsn.htm"
• Follow the directions on the screen

Directions for using the files on your PC

• Download and open the zip file: demolnav.zip
• Extract the files to a directory somewhere on your PC - I recommend the
   "My Documents/L-NAV Demo" folder
• Open the folder and double-click on the file "demolnav.htm"
• Follow the directions on the screen

Note: The IGC required the creation of this program.  It is rarely used.  Most pilots download flight logs using the 300 Utility or SeeYou or StrePla.